Skip to content

DIY Set for CAN'BRICK (Interior Only)

DIY Set for CAN'BRICK (Interior Only)

Adhesive and jointing mortar now come pre-portioned in a single set, ideal for tile craft and DIY over small areas. It covers about 1m² of interior wall with CAN'BRICK, the brick tile that faithfully recreates antique brick. Joint colors are available in the popular MT-MEJI shades: Cream, Off-White, Yellow, Light Brown, and Gray. Combine the set with any brick you like from the wide range of CAN'BRICK designs (11 series, 36 colors, sold separately).

Recommended Joint Width and Estimated Usage

  • Joint Width'-

Ancillary Materials

It comes with a DIY installation manual that explains how to set out and lay brick tile, so beginners can work with confidence. The DIY Set for CAN'BRICK gives a room a stylish new look. Start from 1 m² and take on a self-renovation of your own room.

DIYセット for CAN'BRICK(内装専用）

CDIY-O

DIY Set for CAN'BRICK (Interior Only)

DIYセット for CAN'BRICK(内装専用）
CDIY-O
1 set
—
11kg
¥7,500 ¥7,500/set

Set contents and price

MT-MEJI joint colors (all 5 colors)

MT-MEJI Cream

MT-MEJI Off-White

MT-MEJI Yellow

MT-MEJI Light Brown

MT-MEJI Gray

A stylish new look with the DIY Set for CAN’BRICK

See the included installation manual for details on how to lay the tile

How to set the brick
How to apply the jointing mortar
DIY installation example (approx. 5m²)

Suitable substrates

Gypsum board, calcium silicate board, structural plywood, mortar, concrete

* Clean the substrate and check that it is firmly fixed and that there are no steps at board joints and similar before you install.

* Note that it cannot be used on non-absorbent substrates such as painted surfaces. Remove any wallpaper as well.

Precaution

Important Notes

・The CAN'BRICK brick tile is sold separately.


・Product appearance, specifications, and prices may change without notice as we improve our products.


・Always wear safety glasses, a mask, and rubber gloves while working.


・If it gets in your eyes: rinse immediately with running water and see a doctor.


・If it contacts your skin: wash it off with water. See a doctor if any abnormality appears.


・If swallowed: see a doctor immediately.


・Store away from moisture and direct sunlight, out of the reach of small children.


・Store and work at 5–35℃. Low or high temperatures can cause incomplete curing.


・Do not mix with other materials.


・Use within 1 month of purchase.


・Do not pour leftover MT-BOND or MT-MEJI into rivers or drains; dispose of them in accordance with the law.



Other items

Sub Materials

DIY Set for CAN'BRICK (Exterior Only)

DIY Set for CAN'BRICK (Exterior Only)
MT-MEJI

Jointing Mortar for Interior and Exterior Use

MT-MEJI
Grout Bag

Jointing Mortar Bag

Grout Bag
Kushime kote

Notched Trowel 7mm

Kushime kote
Grapevine Jointer

Jointer for Grapevine Joint Finishing

Grapevine Jointer
MT-BOND-FLEX

Flexible adhesive for interior and exterior tile

MT-BOND-FLEX
ME-05

Adhesive for Interior and Exterior Manufactured Stone Veneer Wall Tile

ME-05
MT-BOND

Adhesive for brick tile, interior use

MT-BOND
REPEL・S

Repel S (penetrating water repellent)

REPEL・S
GLISTEN COAT

Glisten Coat (resin wax for interior use)

GLISTEN COAT
BRICK+AID

BRICK+AID (CAN’BRICK repair kit)

BRICK+AID
STONE+AID

Stone Aid (CAN’STONE repair kit)

STONE+AID
STONE Concealer

Stone Concealer (touch-up compound for CAN'STONE manufactured stone veneer)

STONE Concealer
Sasara

Sasara (joint finishing brush)

Sasara
Brick Chain

Brick Chain Fall Prevention Bracket

Brick Chain

CONTACT

General Inquiries

How to design Installation Manual Contact